|Place of Origin:||Shenzhen, Guangdong, China|
|Minimum Order Quantity:||1 pcs|
|Packaging Details:||barcode scanner+USB/RS232 Cable+ Power Adaptor(for RS232 only). Normal craft paper and foam.|
|Delivery Time:||within 5 working days after receiving the balance|
|Payment Terms:||Western Union, T/T, paypal|
|Supply Ability:||1000 PCS/ week|
|Product Category:||Barcode Scanner Auto 2D Module||Wireless:||None|
|Stock:||Yes||Light Source:||White Light|
|Image Sensor:||752×480 CMOS||Humidity:||5% - 95% （ Non-condensing ）|
|Color:||Black||Certification:||FCC Part15 Class B, CE EMC Class B|
2d barcode module,
Auto 2D 1.75W Barcode Scanner Module reader engine Trigger Mode 752×480 CMOS
RD4500I high speed document 1d2d barcode scanner reader moduel engine , used kodak scanner
RD4500I 2d scanner-Specification.pdf
Why don't barcode scanners always work?
Actually, barcode scanner aleays work, we always know that barcode scaners read barcode with red light over a barcode, so you think the barcode scanner are working, and when the red light turn off, the barcode scanner was not work.
But barcode scanner always work when red light off, just modules was set up by sense mode. we often has 3 kinds of scan mode.
1. Trigger Mode
If the Trigger Mode is enabled, driving the TRIG pin on the host interface connector low activates a
decode session. The session continues until the barcode is decoded or decode session timeout expires
or the active trigger signal is no longer present. For good decode, the engine transmits decoded data via communication port. To activate another session, the Host needs to first negate the trigger, waits 20ms or longer and then drive the TRIG pin low.
2. Sense Mode
If the Sense Mode is enabled, the engine activates a decode session every time it detects a change in
ambient illumination. The decode session continues until the barcode is decoded or the decode session
Driving the TRIG pin on the host interface connector low can also activate a decode session. The decode session continues until the active trigger signal is no longer present or the barcode is decoded or the decode session timeout expires. The trigger signal needs to be negated before the engine is able to monitor ambient illumination again
3. Continuous Mode
This mode enables the engine to scan/capture, decode and transmit over and over again.
When the engine is operating in Continuous Mode, barcode reading can be suspended/resumed through
control over the trigger signal. When barcode reading is in progress, negating the trigger signal after
having maintained it for 30ms or longer will suspend barcode reading; when barcode reading is
suspended, performing the same control over the trigger signal will resume barcode reading.
Access Control Solutions Share: Protecting company assets and employees is a concern every business has regardless of their size. Security is a greater concern than ever and advances in access control technology have moved well beyond the traditional lock and key method. Electronic access control provides improved security and better management of your facility access by utilizing secure IDs that can be tracked at every doorway. Control who as access to your building and never have to change a lock again.
Technical Specifications of RD4500I Auto 2D Barcode Reader Module
|Processor||IOTC 0370 CHIP|
|Image Sensor||752×480 CMOS|
|Symbologies||2D||PDF417, Data Matrix, QR Code|
|1D||EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar, Code 128, Code 93, ITF-6, ITF-14, Interleaved 2 of 5, Industrial 2 of 5, Standard 2 of 5, Matrix 2 of 5, GS1 Databar (RSS-Expand, RSS-Limited, RSS-14), Code 39, Code 11, MSI-Plessey, Plessey|
|Scan Mode||Sense mode|
|Light Source||White LED|
|FOV||Diagonal: 85°, Horizontal: 63.7°, Vertical: 70°|
|Power Consumption||1.75W (max.)|
|Dimensions (L x W x H)||71×61×50mm|
|Operating Temperature||-10°C - +50°C|
|Storage Temperature||-20°C - +60°C|
|Humidity||5% - 95% (non-condensing)|
|Ambient Light||0 ~ 100,000 LUX|
|FCC Part15 Class B, CE EMC Class B|
Barcode Scanner FAQ
Q: How long is your warranty time:
A: 1 Year.
Q: Where can we download the user manual of the scanners?
A: We will send by email after you get samples.
Q: What's the lead time?
A: For sample, it is typically within 3 days. For bulk order, it depends on quantity and model you order.
Q: Can you provide OEM service?
A: Yes. We need further discuss about details.
Q: How do you ship the scanners usually?
A: Since it is light and compact, we usually use DHL, UPS, Fedex, TNT and post air mail.